Posted on :
11:15 PM
| By :
arvin
This paper describes a version of the restore information using the program R-Studio crashes when the file system flash drives. Method of restoring data using the program PHOTO REC (test disk 6.10) described in the article Recovering Data From Flash Drives.
Of course we have to format it now will not, because we need to pull something at least some data.Watch features a flash and we see that the disk size is equal to 0, and the file system from FAT32 into a RAW.
We try not to panic over lost us precious information, and try to recover data. Chance we still have.For this we use the program R-Studio. Install and run the program
found in the list of found our drive flash drive. If the program did not find a flash, then the file system damage rather significant. Maybe the controller is defective or damaged memory chip. In this case, better to turn to experts to restore the information. In our case, our program found the drive.
Select the flash drive and the right mouse button a context menu and select Scan.
Scanning the menu indicates the type of file system which was formatted flash.Start - from start scanning, usually 0.Size - the program calculated the volume of our flash.Other parameters can be set as in the screenshot. After setting the press on the Scan.
Start the scan mode file system.
Scanning coming to an end ...
All scanning is complete, click OK.
A list of the program found during the scan file systems.Recognized1, Recognized2, Recognized3 and so on. In our case we choose Recognized2 File System FAT32, since flash was formatted exactly in it. Call the popup menu and select Open Drive Files.
In Recognized2 tab will appear in the Folder List $ ROOT00001 etc. You can view the found files and directories.
Before the needed files or folders, put checkboxes and click Recover Marked.
Here you need to place (Output Folder) where the program will copy the recovered files. Settings can be left are the same as in the screenshot. If you want to try to recover the information in bad sectors flash memory, uncheck Skip files with bad sectors. After setting press OK.
The specified directory are copied to the selected files. Some data may not be readable or partially restored. Then try to scan the flash with the other program settings.
The program allows you to recover information in case of accidental deletion of files or a quick format the drive.
After recovery can try to recover flash. How to do this is described in the article
The program allows you to recover information in case of accidental deletion of files or a quick format the drive.
After recovery can try to recover flash. How to do this is described in the article
Post a Comment